DRV8800RTYR / SMD/SMT / Texas Instruments / WQFN-16 / Reel
The DRV880x provides a versatile motor driver solution with a variety of capabilities. The device contains a full H-bridge which can be used to drive a brushed DC motor, one winding of a stepper motor, or other devices such as solenoids. A simple PHASEENABLE interface allows easy interfacing to controller circuits. The output stages use N-channel power MOSFETs configured as an H-bridge. The DRV880x is capable of peak output currents up to ±2.8 A and operating voltages up to 36 V. An internal charge pump generates the needed gate drive voltages. A low-power sleep mode is provided which shuts down internal circuitry to achieve a very low quiescent current draw. This sleep mode can be set using a dedicated nSLEEP pin. Internal protection functions are provided for undervoltage, charge pump fault, overcurrent, shortto-supply, short-to-ground, and overtemperature. Fault conditions are indicated through the nFAULT pin. The DRV880x is packaged in a 16-pin WQFN package with PowerPAD™ (Eco-friendly: RoHS & no Sb/Br).
| Product Attribute | Attribute Value |
|---|---|
| Texas Instruments | |
| Product Category: | Motor / Motion / Ignition Controllers & Drivers |
| RoHS: | Details |
| Brushed DC Motor Drivers | |
| Full Bridge | |
| 8 V to 36 V | |
| 2.8 A | |
| 6 mA | |
| - 40 C | |
| + 85 C | |
| SMD/SMT | |
| WQFN-16 | |
| Reel | |
| Cut Tape | |
| MouseReel | |
| Brand: | Texas Instruments |
| Features: | Current Limitation |
| Moisture Sensitive: | Yes |
| Number of Outputs: | 1 Output |
| Product Type: | Motor / Motion / Ignition Controllers & Drivers |
| Rds On - Drain-Source Resistance: | 830 mOhms |
| Series: | DRV8800 |
| Factory Pack Quantity: | 3000 |
| Subcateg: | PMIC - Power Management ICs |
| Unit Weight: | 0.001238 oz |
